Struggling with 3rd party coating to repair your pond? – Try Pondpro2000 NOW

Common problem of pond leak can be solving if you use right product at right time. It use to happen that after being suffer the problem, you check different solutions become fail and decide by yourself that it does not have any solution. Mostly people give up their pond care and remove them. Just, because they don’t do proper care first and then don’t get proper solution for problem.

Different type of pond construction also becomes an issue that how to get solution. For concrete it is always a problem that no solution can be more effective due to last failure solution. The remaining of last sealant doesn’t permit the new one to work properly. Some time it needs more strength.

Pond Pro Concrete pond repair is the industry's one coat solution to concrete pond leaks. There is some reason that you can’t get better than this.

·         It is applied up to 10 times thicker than other products!

·         Other products are coated at a 3 or 4 mil whereas Pond repair is applied at a 30 mil about the depth of 10 pieces of paper.

·         It will chemically fuse itself to the substrate and any trapped air will be forced to the surface.

·         It is specifically formulated for existing concrete ponds and any ponds that have been coated with a 3rd party.

·         Pond will have with an airtight seal. Now you can enjoy five years warranty which is unconditional.

Your concrete pond surface needs to be clean, dry and structurally sound. Existing coatings can be removed with a scraper and wire brush. Good adhesion may remain for the longest period of years. It can be used on other surfaces too. Results will be same good. Tightly adhering corrosion may be directly coated with Pond Pro Concrete. It is water-resistant and works in extreme temperature. It’s a great innovation to redesign your pond with repair. In its presence nobody can be fed-up of maintaining pond. Its easy application leaves a hard time for leaks.